Struct rustc_hir::definitions::DefPathHash

source ·
pub struct DefPathHash(pub Fingerprint);
Expand description

A DefPathHash is a fixed-size representation of a DefPath that is stable across crate and compilation session boundaries. It consists of two separate 64-bit hashes. The first uniquely identifies the crate this DefPathHash originates from (see StableCrateId), and the second uniquely identifies the corresponding DefPath within that crate. Together they form a unique identifier within an entire crate graph.

There is a very small chance of hash collisions, which would mean that two different DefPaths map to the same DefPathHash. Proceeding compilation with such a hash collision would very probably lead to an ICE, and in the worst case lead to a silent mis-compilation. The compiler therefore actively and exhaustively checks for such hash collisions and aborts compilation if it finds one.

DefPathHash uses 64-bit hashes for both the crate-id part and the crate-internal part, even though it is likely that there are many more LocalDefIds in a single crate than there are individual crates in a crate graph. Since we use the same number of bits in both cases, the collision probability for the crate-local part will be quite a bit higher (though still very small).

This imbalance is not by accident: A hash collision in the crate-local part of a DefPathHash will be detected and reported while compiling the crate in question. Such a collision does not depend on outside factors and can be easily fixed by the crate maintainer (e.g. by renaming the item in question or by bumping the crate version in a harmless way).

A collision between crate-id hashes on the other hand is harder to fix because it depends on the set of crates in the entire crate graph of a compilation session. Again, using the same crate with a different version number would fix the issue with a high probability – but that might be easier said then done if the crates in questions are dependencies of third-party crates.

That being said, given a high quality hash function, the collision probabilities in question are very small. For example, for a big crate like rustc_middle (with ~50000 LocalDefIds as of the time of writing) there is a probability of roughly 1 in 14,750,000,000 of a crate-internal collision occurring. For a big crate graph with 1000 crates in it, there is a probability of 1 in 36,890,000,000,000 of a StableCrateId collision.

Tuple Fields§

§0: Fingerprint

Implementations§

source§

impl DefPathHash

source

pub fn stable_crate_id(&self) -> StableCrateId

Returns the StableCrateId identifying the crate this DefPathHash originates from.

source

pub fn local_hash(&self) -> Hash64

Returns the crate-local part of the DefPathHash.

source

pub fn new(stable_crate_id: StableCrateId, local_hash: Hash64) -> DefPathHash

Builds a new DefPathHash with the given StableCrateId and local_hash, where local_hash must be unique within its crate.

Trait Implementations§

source§

impl Clone for DefPathHash

source§

fn clone(&self) -> DefPathHash

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for DefPathHash

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl<__D> Decodable<__D> for DefPathHash
where __D: SpanDecoder,

source§

impl Default for DefPathHash

source§

fn default() -> DefPathHash

Returns the “default value” for a type. Read more
source§

impl<__E> Encodable<__E> for DefPathHash
where __E: SpanEncoder,

source§

fn encode(&self, __encoder: &mut __E)

source§

impl Hash for DefPathHash

source§

fn hash<__H>(&self, state: &mut __H)
where __H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl<__CTX> HashStable<__CTX> for DefPathHash
where __CTX: HashStableContext,

source§

fn hash_stable( &self, __hcx: &mut __CTX, __hasher: &mut StableHasher<SipHasher128>, )

source§

impl Ord for DefPathHash

source§

fn cmp(&self, other: &DefPathHash) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for DefPathHash

source§

fn eq(&self, other: &DefPathHash) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for DefPathHash

source§

fn partial_cmp(&self, other: &DefPathHash) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StableOrd for DefPathHash

source§

const CAN_USE_UNSTABLE_SORT: bool = true

source§

const THIS_IMPLEMENTATION_HAS_BEEN_TRIPLE_CHECKED: () = ()

Marker to ensure that implementors have carefully considered whether their Ord implementation obeys this trait’s contract.
source§

impl<CTX> ToStableHashKey<CTX> for DefPathHash
where CTX: HashStableContext,

source§

impl Copy for DefPathHash

source§

impl Eq for DefPathHash

source§

impl StructuralPartialEq for DefPathHash

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Aligned for T

source§

const ALIGN: Alignment = _

Alignment of Self.
source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<'tcx, T> ArenaAllocatable<'tcx, IsCopy> for T
where T: Copy,

source§

fn allocate_on<'a>(self, arena: &'a Arena<'tcx>) -> &'a mut T

source§

fn allocate_from_iter<'a>( arena: &'a Arena<'tcx>, iter: impl IntoIterator<Item = T>, ) -> &'a mut [T]

source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> CloneToUninit for T
where T: Copy,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<Q, K> Comparable<K> for Q
where Q: Ord + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn compare(&self, key: &K) -> Ordering

Compare self to key and return their ordering.
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<T> Pointable for T

source§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
source§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
source§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
source§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
source§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> StableCompare for T
where T: StableOrd,

source§

const CAN_USE_UNSTABLE_SORT: bool = T::CAN_USE_UNSTABLE_SORT

source§

fn stable_cmp(&self, other: &T) -> Ordering

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

source§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<'a, T> Captures<'a> for T
where T: ?Sized,

Layout§

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 16 bytes